Hi Everybody I have viewed your Producerbundle and it's pretty good. Now I have a problem with Touch Tracks. I can't hear any Audio Signal but the Peak in the Arrangement on the left of the Instrument-Track lights up while I press the Key. I did everything like its written in the owners manual and showed in the viedeos. I guess there is a false setting or something like that. Thank you for helping me with this problem. Yours Sincerely mitch

Thanks for your Answer. I tried all of your suggestions but I still can trigger a touch track only by playing the virtual keyboard on the Touch-Tracks Editor. Unfortunately I can not trigger them by Caps Lock-Keyboard and my MIDI-Keyboard using a konnekt 8 Firewire-Interface. Could it be there is anything wrong with my MIDI-Device or false MIDI-Settings? Greets.

Hi Steve I don't know why - but now it works. It's good to have your advice with this forum. This is a very good support place. Thank you anyway for helping me. yours sincerely

Is there a way to program only one Chord and then play the same Chord (transposed) from each key?

Thanks for your answer. Unfortunately it is not possible to do that. would be cool if. may be in the future. could be a nice suggestion for updates.

Hi cy Thanks for your suggestion. Sounds complicate and complex to me. I thougt there would be an easier way to play chords the way i want to do. great, i'll try this. greets. michi

Hi Iâ?? m not an expert but i try to explain it to you. One thing is important: MIDI does not transmit Audiosignal. If you want to here your digital piano then you might put your headphones directly to the output of your digital piano or connect it with your audio-interface or your mixer. If you need to play Logicâ??s Plug-Ins or third party Plug-Ins, choose on the Arrangepage in the tracklist by clicking a trackname: Audio -> Audio Instrument, now you can Insert an Instrument for example the ES2 Synth in the I/O insert slot. Now you should hear the played notes on your mac book thru the integrated audio (speakers or headphones or connected monitors) If you want to hear the internal Quicktimesynth you have to open the environment. Then choose the MIDI-Instr.-Layer. By clicking the new button in the menu choose internal -> Apple Quicktime. Now choose -> new -> Multi-Instrument. Cable them by draging an arrow of your Multi-Instrument to your QuickTime Synth. There are 16 Channels, enable all of these channels. Now go to the arrangepage click a trackname and choose MIDI-Instr. -> Multi-Instrument. In the checkbox of your Multi-Instrument you can enable the program-checkbox and choose your requested MIDI-Instrument. I hope i could help you with your question.

Hello, By triggering Touchtracks there appears a message: "Audio and MIDI synchronisation error" and i got no sound. However the peak in the Arrangepage left of the tracknumber deflects. I have no signal in the accordingly channel-strip. May anybody help me with this problem? Thanks. Greets Michi

Hello I've still got a big problem with Touch Tracks. If i'm triggering TT there's no audio signal. I have this since i installed Logic. Although the peak in the Arrange-Page, left of the Trackname, deflects and i have MIDI-Signal. In the Channel-Strip is no peak. May i install Logic from new? Thanks for helping me. Greets Michi

Hi Christian. Thanks first for your answer. I tried everything. My Logic song is playing, the TT object is in the arrangepage. I made all thats showed in your tutorial videos und its written in the manual. I have no signal. Since i installed Logic there was no sound using Touch Tracks. However Delay Line and Arpeggio works. Have i to install Logic from new or to do anything others? Hope you have a solution. Greets. Michi